Difference between revisions of "Linbian Configuration"

From Lindenis Wiki
Jump to: navigation, search
(Ethernet)
(Ethernet)
Line 9: Line 9:
 
== Ethernet ==
 
== Ethernet ==
  
Ethernet is enabled by default.
+
Ethernet is enabled by default. Plug in the network cable will automatically connect to the Internet.
 +
 
 +
[https://launchpad.net/wicd Wicd] is used for manage wireless and wired interface.
 +
 
 +
=== Running Wicd in Desktop Environment ===
 +
 
 +
Open '''Wicd Network Manager''' from desktop. If the board is properly set up and connected, you should see a Window as follow.
 +
 
 +
[[File:wicd-nm-wired.png|frameless]]
 +
 
 +
=== Running Wicd in Text Mode ===
 +
 
 +
Open a Terminal from desktop. Type '''wicd-curses''':
 +
 
 +
[[File:wicd-curses.png|frameless]]
 +
 
 +
Manage network by keyboard.
  
 
== Wi-Fi ==
 
== Wi-Fi ==

Revision as of 08:05, 25 August 2018

linbian-config

In development

UART configuration

By default, the ttyS0 is assigned to the Linux console. The UART transmit and receive pins are on PB9 and PB10 espectively, which are pins 8 and 10 on the 'PI BUS' GPIO header.

Ethernet

Ethernet is enabled by default. Plug in the network cable will automatically connect to the Internet.

Wicd is used for manage wireless and wired interface.

Running Wicd in Desktop Environment

Open Wicd Network Manager from desktop. If the board is properly set up and connected, you should see a Window as follow.

Wicd-nm-wired.png

Running Wicd in Text Mode

Open a Terminal from desktop. Type wicd-curses:

Wicd-curses.png

Manage network by keyboard.

Wi-Fi

Bluetooth

Camera Config

External Storage Config

Localisation