Linbian Configuration

From Lindenis Wiki
Revision as of 10:53, 24 August 2018 by Csjamesdeng (talk | contribs) (Ethernet)
Jump to: navigation, search

linbian-config

In development

UART configuration

By default, the ttyS0 is assigned to the Linux console. The UART transmit and receive pins are on PB9 and PB10 espectively, which are pins 8 and 10 on the 'PI BUS' GPIO header.

Ethernet

Ethernet is enabled by default.

Wi-Fi

Bluetooth

Camera Config

External Storage Config

Localisation