Difference between revisions of "Linbian Remote Access"

From Lindenis Wiki
Jump to: navigation, search
(Using the board without a display)
(Using the board without a display)
Line 10: Line 10:
  
 
In a web browser navigate to your router's IP address e.g. '''http://192.168.1.1''', which is usually printed on a label on your router; this will take you to a control panel. Then log in using your credentials, which is usually also printed on the router or sent to you in the accompanying paperwork. Browse to the list of connected devices or similar (all routers are different), and you should see some devices you recognise. Some devices are detected as PCs, tablets, phones, printers, etc. so you should recognise some and rule them out to figure out which is your board. Also note the connection type; if your board is connected with a wire there should be fewer devices to choose from.
 
In a web browser navigate to your router's IP address e.g. '''http://192.168.1.1''', which is usually printed on a label on your router; this will take you to a control panel. Then log in using your credentials, which is usually also printed on the router or sent to you in the accompanying paperwork. Browse to the list of connected devices or similar (all routers are different), and you should see some devices you recognise. Some devices are detected as PCs, tablets, phones, printers, etc. so you should recognise some and rule them out to figure out which is your board. Also note the connection type; if your board is connected with a wire there should be fewer devices to choose from.
 +
 +
==== Using your smartphone ====
 +
 +
The Fing app is a free network scanner for smartphones. It is available for Android and iOS.
 +
 +
Your phone and your Raspberry Pi have to be on the same network, so connect your phone to the correct wireless network.
 +
 +
When you open the Fing app, touch the refresh button in the upper right-hand corner of the screen. After a few seconds you will get a list with all the devices connected to your network.
  
 
== VNC ==
 
== VNC ==

Revision as of 03:18, 24 August 2018

IP address

Using the board with a display

Using the terminal (open a Terminal window from the desktop), simply type hostname -I which will reveal your board IP address.

Using the board without a display

Router Device List

In a web browser navigate to your router's IP address e.g. http://192.168.1.1, which is usually printed on a label on your router; this will take you to a control panel. Then log in using your credentials, which is usually also printed on the router or sent to you in the accompanying paperwork. Browse to the list of connected devices or similar (all routers are different), and you should see some devices you recognise. Some devices are detected as PCs, tablets, phones, printers, etc. so you should recognise some and rule them out to figure out which is your board. Also note the connection type; if your board is connected with a wire there should be fewer devices to choose from.

Using your smartphone

The Fing app is a free network scanner for smartphones. It is available for Android and iOS.

Your phone and your Raspberry Pi have to be on the same network, so connect your phone to the correct wireless network.

When you open the Fing app, touch the refresh button in the upper right-hand corner of the screen. After a few seconds you will get a list with all the devices connected to your network.

VNC

SSH

SCP

FTP

Web Server

Streaming Server