Difference between revisions of "Linbian Setup"
Csjamesdeng (talk | contribs) (→Download the image) |
Csjamesdeng (talk | contribs) (→Writing an image to the SD card) |
||
| Line 19: | Line 19: | ||
=== Writing an image to the SD card === | === Writing an image to the SD card === | ||
| + | |||
| + | Writing the image to MicroSD Card by Etcher is recommended. | ||
| + | * Using a computer with an MicroSD Card reader. | ||
| + | * Visit [https://etcher.io/ etcher.io] and download and install the Etcher SD card image utility. | ||
| + | * Run Etcher and select the image you downloaded. | ||
| + | * Select the SD card drive. Note that the software may have already selected the right drive. | ||
| + | * Finally, click '''Burn''' to transfer the image to the MicroSD Card. You'll see a progress bar that tells you how much is left to do. Once complete, the utility will automatically eject/unmount the SD card so it's safe to remove it from the computer. | ||
== Troubleshooting == | == Troubleshooting == | ||
Revision as of 10:52, 1 August 2018
Contents
What you Need
You will need the following to get started with using your Lindenis V5 board:
- Windows / Linux PC or MAC with a SD Card Reader connected to the Internet.
- Power Supply (PSU) and a micro usb cable. Please make sure to use a PSU rated at +5V@2A.
- MicroSD card (4GB or higher capacity) rated 'class 10' or better.
- Camera module (recommended).
- HDMI cable (optional).
- Network Cable connected to the Internet (optional).
- Input device(s) such as: keyboard, mouse, etc.
Optional
Installation
Download the image
Download the image from FTP server with user 'ftp' (password: lindeni).
Writing an image to the SD card
Writing the image to MicroSD Card by Etcher is recommended.
- Using a computer with an MicroSD Card reader.
- Visit etcher.io and download and install the Etcher SD card image utility.
- Run Etcher and select the image you downloaded.
- Select the SD card drive. Note that the software may have already selected the right drive.
- Finally, click Burn to transfer the image to the MicroSD Card. You'll see a progress bar that tells you how much is left to do. Once complete, the utility will automatically eject/unmount the SD card so it's safe to remove it from the computer.
