Difference between revisions of "Lindenis V5"

From Lindenis Wiki
Jump to: navigation, search
(Expansion Ports)
(Hardware Specification)
Line 79: Line 79:
 
* Board Dimensions: 130mm x 85mm
 
* Board Dimensions: 130mm x 85mm
 
* Input Power: 5V@2A micro USB connector, 3.7V Li-Ion battery connector
 
* Input Power: 5V@2A micro USB connector, 3.7V Li-Ion battery connector
 +
 +
==== Board Schematic ====
 +
 +
==== Board Certifications ====
  
 
== Datasheet ==
 
== Datasheet ==
  
 
== SDK ==
 
== SDK ==

Revision as of 14:01, 5 July 2018


Key Features

Target Applications

OS

Linbian OS

Others OS

Hardware Specification

SoC and Memory

CPU Architecture

  • Quad-core ARM Cortex-A7 Processor@1512Mhz
  • A power-efficient ARM v7 architecture
  • Support NEON Advanced SIMD (Single Instruction Multiple Data) instruction for acceleration of media and signal processing function
  • VFPv4 Floating Point Unit
  • 32KB L1 Instruction cache and 32KB L1 Data cache
  • 512KB L2 cache

VPU Architecture

  • Video Encoding H.265/H.264 4K@30fps
  • Video Decoding H.265/H.264 4K@30fps

IPU Architecture

  • Dual ISP 13M@30fps + 8M@30fps
  • Fisheye
  • Stitching

AIE Architecture

  • Built-in with intelligent analytics acceleration engine.
  • Supports motion detection, perimeter defense, video diagnosis, face detection, flow statistics.
  • Supports binocular depth map.

System Memory

  • RAM Memory: 1GB
  • Storage Memory: Lindenis V5 do not have built-in flash

Board Features

Video

  • HDMI 1.4a (Type A - full)

Audio

  • 3.5mm Line in / out

Network

  • 10/100/1000Mbps Ethernet
  • WiFi with Bluetooth (optional)

Storage

  • MicroSD Card bootable, support SDHC and SDXC, storage up to 256GB
  • USB2.0 Host port

Expansion Ports

  • CSI - 2 CMOS Camera MIPI interface, MIPI-CSI0 up to 13 mega pixel, MIPI-CSI1 up to 8 mega pixel
  • DSI - Display Serial Interface, 4 lanes MIPI, up to 1080P
  • Board to Board connector - Flash module interface
  • Wi-Fi/BT Module Header - SDIO 3.0 and UART
  • 2x20 pins "PI BUS" GPIO Header
  • 2x3 pins GPIO Header
  • 2x7 pins "I2S" GPIO Header
  • VBAT - Battery connector
  • 2x28 pins "CSI0" and "CSI1" GPIO Header

Board Information

  • Board Dimensions: 130mm x 85mm
  • Input Power: 5V@2A micro USB connector, 3.7V Li-Ion battery connector

Board Schematic

Board Certifications

Datasheet

SDK