Writing an image to the eMMC

From Lindenis Wiki
Revision as of 16:43, 29 August 2018 by Csjamesdeng (talk | contribs)
Jump to: navigation, search

Writing the image to eMMC by PhoenixUSBPro.

  • Follow this guide to install the eMMC module to the board.
  • Visit FTP server with user 'ftp' (password: lindeni) and download the PhoenixUSBPro (note: Windows only).
  • Unzip the files to a local directory.
  • Short-circuit these two test points by tweezers or wire.

Lindenis-v5-uboot-test-point.jpg

  • Plug the Windows PC's USB cable into the board.