Difference between revisions of "Linbian Remote Access"
Csjamesdeng (talk | contribs) (→IP address) |
Csjamesdeng (talk | contribs) (→Using the board without a display) |
||
| Line 6: | Line 6: | ||
=== Using the board without a display === | === Using the board without a display === | ||
| + | |||
| + | ==== Router Device List ==== | ||
| + | |||
| + | In a web browser navigate to your router's IP address e.g. '''http://192.168.1.1''', which is usually printed on a label on your router; this will take you to a control panel. Then log in using your credentials, which is usually also printed on the router or sent to you in the accompanying paperwork. Browse to the list of connected devices or similar (all routers are different), and you should see some devices you recognise. Some devices are detected as PCs, tablets, phones, printers, etc. so you should recognise some and rule them out to figure out which is your board. Also note the connection type; if your board is connected with a wire there should be fewer devices to choose from. | ||
== VNC == | == VNC == | ||
Revision as of 03:12, 24 August 2018
Contents
IP address
Using the board with a display
Using the terminal (open a Terminal window from the desktop), simply type hostname -I which will reveal your board IP address.
Using the board without a display
Router Device List
In a web browser navigate to your router's IP address e.g. http://192.168.1.1, which is usually printed on a label on your router; this will take you to a control panel. Then log in using your credentials, which is usually also printed on the router or sent to you in the accompanying paperwork. Browse to the list of connected devices or similar (all routers are different), and you should see some devices you recognise. Some devices are detected as PCs, tablets, phones, printers, etc. so you should recognise some and rule them out to figure out which is your board. Also note the connection type; if your board is connected with a wire there should be fewer devices to choose from.
