Difference between revisions of "Lindenis V5"
Csjamesdeng (talk | contribs) (→Expansion Ports) |
Csjamesdeng (talk | contribs) (→Hardware Specification) |
||
Line 79: | Line 79: | ||
* Board Dimensions: 130mm x 85mm | * Board Dimensions: 130mm x 85mm | ||
* Input Power: 5V@2A micro USB connector, 3.7V Li-Ion battery connector | * Input Power: 5V@2A micro USB connector, 3.7V Li-Ion battery connector | ||
+ | |||
+ | ==== Board Schematic ==== | ||
+ | |||
+ | ==== Board Certifications ==== | ||
== Datasheet == | == Datasheet == | ||
== SDK == | == SDK == |
Revision as of 14:01, 5 July 2018
Key Features
Target Applications
OS
Linbian OS
Others OS
Hardware Specification
SoC and Memory
CPU Architecture
- Quad-core ARM Cortex-A7 Processor@1512Mhz
- A power-efficient ARM v7 architecture
- Support NEON Advanced SIMD (Single Instruction Multiple Data) instruction for acceleration of media and signal processing function
- VFPv4 Floating Point Unit
- 32KB L1 Instruction cache and 32KB L1 Data cache
- 512KB L2 cache
VPU Architecture
- Video Encoding H.265/H.264 4K@30fps
- Video Decoding H.265/H.264 4K@30fps
IPU Architecture
- Dual ISP 13M@30fps + 8M@30fps
- Fisheye
- Stitching
AIE Architecture
- Built-in with intelligent analytics acceleration engine.
- Supports motion detection, perimeter defense, video diagnosis, face detection, flow statistics.
- Supports binocular depth map.
System Memory
- RAM Memory: 1GB
- Storage Memory: Lindenis V5 do not have built-in flash
Board Features
Video
- HDMI 1.4a (Type A - full)
Audio
- 3.5mm Line in / out
Network
- 10/100/1000Mbps Ethernet
- WiFi with Bluetooth (optional)
Storage
- MicroSD Card bootable, support SDHC and SDXC, storage up to 256GB
- USB2.0 Host port
Expansion Ports
- CSI - 2 CMOS Camera MIPI interface, MIPI-CSI0 up to 13 mega pixel, MIPI-CSI1 up to 8 mega pixel
- DSI - Display Serial Interface, 4 lanes MIPI, up to 1080P
- Board to Board connector - Flash module interface
- Wi-Fi/BT Module Header - SDIO 3.0 and UART
- 2x20 pins "PI BUS" GPIO Header
- 2x3 pins GPIO Header
- 2x7 pins "I2S" GPIO Header
- VBAT - Battery connector
- 2x28 pins "CSI0" and "CSI1" GPIO Header
Board Information
- Board Dimensions: 130mm x 85mm
- Input Power: 5V@2A micro USB connector, 3.7V Li-Ion battery connector