Writing an image to the eMMC

Writing the image to eMMC by PhoenixUSBPro.

• Follow this guide to install the eMMC module to the board.
• Visit FTP server with user 'ftp' (password: lindeni) and download the PhoenixUSBPro (note: Windows only).
• Unzip the files to a local directory.
• Unzip the image to a local directory.
• Open PhoenixUSBPro.

• Click Image button and select the uncompressed image.

• Click Start button.

• Waiting for PhoenixUSBPro is ready.

• Short circuit these two test points by tweezers or wire.

• Use a Micro USB cable to connect the board to the computer. Do not short circuit these two test points when you see the follow window again.

• Waiting for writing process start. You'll see a progress bar that tells you how much is left to do.

• It takes about six minutes. Once complete, Use the Power Supply and Micro USB cable to connect the board instead.