Writing an image to the eMMC
Revision as of 16:43, 29 August 2018 by Csjamesdeng (talk | contribs)
Writing the image to eMMC by PhoenixUSBPro.
- Follow this guide to install the eMMC module to the board.
- Visit FTP server with user 'ftp' (password: lindeni) and download the PhoenixUSBPro (note: Windows only).
- Unzip the files to a local directory.
- Short-circuit these two test points by tweezers or wire.
- Plug the Windows PC's USB cable into the board.
